About the Bamdad rope wall
Bamdad has been designing and producing rope walls since 2012. Our expert design team offers an endless variety of shapes, angles and special features that can be used to match any look and function you can imagine. Engineers then ensure that the completed project is safely and precisely designed. In Bamdad, we try to offer you the best offer according to your budget and space.
Building height requirements
Recommended minimum height:
The recommended minimum height for a rope wall is 12 meters. This wall requires a minimum ceiling height of 12.5 meters. Shorter walls, about 10 meters, are used for children’s climbing.
Recommended maximum height:
The maximum size of this wall is the sky! The maximum height of a commercial rock climbing wall is limited only by the height of the building that houses it.
The IFSC standard for rope climbing competition walls is 15 meters. Bamیad recommends a maximum of 18 meters for optimal performance.
Rope climbing course
A top rope is a string in which the climber leads the rope from the bottom to the top of the wall. The high ropes course is part of the three Olympic disciplines and the climber’s goal is to climb as high as possible within six minutes. If two climbers have climbed to the same height in this wall. Whoever had less time wins. The rope wall is at least 15 meters high and at least 7 meters wide.
In a climbing complex, the rope wall is the tallest and most prominent part and adds an impressive appearance to the complex.
A special thing to keep in mind is that the safety zone of a rope wall is at least 1 meter more than the projection of the top line of the wall. The rope wall usually hosts competitions and therefore needs space for spectators. But it is often neglected in design, due to the use of all available space for climbing.
Bamdad monitors all the details and guarantees the efficiency, standard and profitability of your wall
adventure game
Rope climbing is an easier version of climbing a high wall. In this method, the rope is fixed at the top of the climbing wall and users can climb the wall using the rope.
This style is mostly used for fun, group fun competitions or training beginners in rope walls.
Steel structure
The structure of our rope walls is made of steel. Steel structures are very strong and durable, which makes them the best option for wall construction. Compared to other materials, steel exhibits significant strength and structural integrity, providing a reliable and long-lasting solution.
Types of panels
Climbing wall panels can be made of plywood or fiberglass depending on the design style and the function for which they are designed.
Polywood panels
✓ Made of strong plywood
✓ Water resistant coating
✓ Smooth or engraved surface
Fiberglass panels
✓ Made of fiberglass and polyester resin
✓ Completely waterproof
✓ Durable yet very light weight
Material and type of panels
If you ask ten different climbers to evaluate the material of the panels of the same wall, you can be sure that you will not get the same answer twice. Some say it was good, some say it was slippery, and some say it was too rough. Despite this, we managed to create a surface that received the most approval among users.
Some of our walls combine friction texture with smooth panels. With this style, climbers can be challenged in some parts of the wall.
The resistance of panels against destruction
This is an incredibly important feature. Panels are the part with the highest depreciation rate. We believe that the texture of a wall should not wear out and should also retain its color for at least 20 years. For this reason, Bamdad has developed an innovative way to produce durable products that ensures the quality of the products for a long time.
Dirt-resistant coating
To protect the colors of the wall and keep it as clean as possible, we have developed a dirt-resistant coating that prevents the rubber of climbing shoes from sticking to the surface of the wall. However, due to the nature of the material (soft rubber in contact with the wall surface) and other factors, the walls become dirty over time. Our texture allows for easy cleaning and maintenance of the wall surface.
Rope protective strips
Ropes are a consumable with a high rate of depreciation and need to be replaced regularly. To extend their life and at the same time make the wall look neater, we have designed a rope protection tape that is the thinnest type available on the market.
benefits
✓ Maintains the effect of the climbing wall
✓ Increases the life of the rope
✓ Reduces the pressure of lowering and bailing
✓ Protects protruding corners from rope friction
Possibilities
✓ Fine metal strap (5 mm)
✓ Accurate connection in the corners
✓ It is installed on all convex corners.
The strength of T nuts
The breaking point strength of T-nuts is their only standard requirement. But this is not enough. In addition to higher strength, T-nuts are fixed to the panels with two screws and prevent it from coming out of the panel, even if the clamp is not installed.
Placement of T nuts
We make sure there are always enough T-nuts around the corners. Other manufacturers connect the panels through wooden pieces and therefore it is not possible to put T-nuts in their corners. But we have found a solution for this in Bamdad and we can easily place the T-nuts near the edges and corners.
Maintenance line
Maintenance line It is a part of the wall that the climber can grab at the end of the path to keep himself on top of the wall, this element is not required by any climbing standard, but we consider it mandatory and offer it as part of our standard package. we do.
Multifaceted panels
Polyhedron polyhedrons offer an endless variety of 3D design possibilities with a minimal appearance. An unlimited range of color combinations gives each climbing wall a unique and distinctive look. Flat panels and the necessary placement of T-nuts provide many options for adjusting the track. This model is the most economically efficient because it offers everything a climbing club needs at a reasonable cost.
3D curves
3D curves are often used in the composition of panels to create a special feature in climbing halls. It is better to make these panels from fiberglass because they have absolutely no limitations in terms of shape. These panels are suitable for indoor and outdoor use. Although aesthetically pleasing, curved shapes pose limitations in routing because they are not suitable for some clamps and large volumes.
The embodiment of real rock climbing
Back to the roots of early morning rock climbing. These walls are exactly like real rocks, and for their natural feel, the molds that form the fiberglass plates are made of real stones. This style adds a lot of interesting features and challenges to your wall that will engage a wider range of people even with the addition of special morning clips that are made with high anti-breakage technology.
This style, in addition to climbing walls, can be used to create artificial rocks and boulders for outdoor urban environments such as parks, recreation areas, and zoos.
LED lamps
Enhance your wall with indoor LED lighting. This feature allows you to design your wall in any color using RGB LEDs.
Transparent panels
Design part of your climbing wall with a transparent panel that can be climbed. Plexiglas and transparent resin panels can be combined with plywood or fiberglass panels. However, these panels have less friction than other panels.
Personal protection points
Every rock climber has his own way to climb the rope head walls. In some methods of climbing, climbers connect their harnesses to the points marked on the wall through special ropes, in case the climber slips. These ropes prevent him from falling and act as a support.
These points are vital equipment in every rope wall. They are usually made of bolts and nuts that are connected to the main structure of the wall, which is the steel frame, to ensure their strength and durability. But due to the load that each point bears, wear and possible small movements of the wall, these bolts and nuts may loosen and threaten the health of climbers.
Bamdad offers U-bolts and provides part of the standard equipment of Houd.
This equipment:
✓ Prevents fast wear of bolt and nut connection to steel frame.
✓ It has the same strength in both parts of the vertical wall and the ceiling wall with a breaking value of 35 kilonewtons
✓ It is fixed not only with one nut but with 4 nuts on the steel structure, so that if 3 of them become loose, the protection point will still remain safe.
Every point is important
We think beyond international standards to ensure that all protection points are precisely calculated by creating a complete 3D model with all wall elements.
Then we apply the loads that are usually applied to a point in a rise and fall on each of the protection points sequentially. In this process, we find the most unfavorable protection point for each element and each connection between elements.
In this way, we can calculate the structural integrity of the wall by considering each corner of the wall.
Holding rod
This device is installed on top of the climbing path. This is a climbing hold station, as there are two separate locations for top rope climbing and abseiling – a flat cylinder for abseiling and two locking carabiners for abseiling.
benefits
- It doubles the life of the ropes
- – Reduces load bearing
Upper holder
This device is installed on the top of the wall and is suitable for both climbing with a rope and climbing the wall. This holder keeps the carabiners at a proper distance from the wall panels. Therefore, it eliminates the risk of friction between the rope and the wall, and allows the device to be installed on large ledges and ceilings.
benefits
- Keeps carabiners and ropes away from the climbing wall
- zeroing the friction between the rope and the wall fabric
- Suitable for large ridges and roofs
- Carabiners can be replaced and any desired carabiner can be installed on the wall
- Suitable for slabs up to 10 degrees
- Made of stainless steel (for indoor and outdoor use)
Automatic support
Autobily devices automatically retract the rope during ascent and control speed during descent or in the event of a fall. Rock climbing walls can work with a variety of automotive devices.
We have produced this device for the first time in the Middle East and even Asia!
Bamdad engineers and designers have localized the production of this safety device after many efforts with their technology and science and have taken a big step for the progress and safety of athletes.
The quality of the automatic morning support device is on par with foreign examples of this device and in some cases better than them. After several stages of testing, this device has come out successful in the morning safety tests. This model uses automatic support device, mechanical centrifugal brake technology, and is twice the size of the foreign model, light weight and compact.
AutoBelay entrances
These inputs are the connection point of the device when not in use. They are designed to prevent climbers from attempting to climb without a tether and to be the last point of warning if the harness is attached to the user’s harness.
These panels will be made in your custom colors and designs. We suggest brighter colors to easily attract the attention of climbers.
Standard colors
One of the most important details of the climbing wall is its color scheme, because it affects the whole atmosphere of the hall. Bamdad uses a standard color palette that allows multiple color combinations, clever compositions and creative interior designs.
Natural wood color
Natural wood panels look very beautiful in combination with monochromatic panels and make your wall attractive. There are three colors of light, medium and dark
The color of natural wood veneers
Natural wood veneers add another dimension to the design of the climbing wall. These colors transform the look of your wardrobe.
natural stone
Natural stone panels are a prominent element in the design of a climbing gym. They look attractive in combination with solid panels or natural wood. Natural stone is available in a variety of textures and colors.
Custom colors
Want more colors on your wall? Think of any combination, we can make it happen. Our technology enables unlimited design opportunities, full compatibility in every panel and excellent execution.
Rope wall mattress
Standard rope wall mats are suitable for falling from a height of 3 meters. They are either from a thick layer
They consist of polyurethane foam and glue.
Bamdad safety mattress
Bamdad safety flooring can prevent serious injuries in the event of a fall from a height of up to 16.5 meters. It is the first type of mattress to be made safer for falls from height in the Middle East. Bammad has ensured the safety of these mattresses by using various tests.
Although there are no regulations regarding safety mats for climbing activities above 5m, we feel it is our moral duty to emphasize the importance of adding suitable mats to climbing walls, especially if children are using them.
Bamdad rope walls
Nothing Found
Apologies, but no results were found. Perhaps searching will help find a related post.
