lead
From the tendencies of mountaineering. The main trend is Indoor rock climbing
And it can be said that climbing is an endurance style
that athlete By climbing a long and endurance route with at least 20 climbing clips
(In climbing competitions, the number of pegs is about 60 pegs) He challenges himself.
The minimum number required for a lead climb is two people.
One as Qi support and one ascendant.
The climber ties the rope with eight knots.
And the supporter throws the continuation of the rope into the locking device (giri giri).
and connects to his harness. To restrain the climber in the event of a fall and neutralize the shock caused by it.
During the climb, the climber throws his rope into the middles (quick draw).
(The first quick draw is at a height of three meters.) to be restrained by the last middle in case of falling or finishing the climb.
in lead competitions
The climber’s score is based on the number of pegs touched by the participant.
In this type of rock climbing walls, the shape and complications of the wall, the number of clamps and slopes can be implemented differently depending on the height of the hall or open space and the closedness of the wall and other factors.
In this trend, beginners can climb in the form of a pulley at the beginning of their training, depending on the coach’s opinion.
In this way, there is no need to drop intermediates on the way while climbing.
And the rope has already been raised by the instructor inside the workshop
And the climber can sit on his harness (safety belt) wherever he wants to stop climbing, and the supporter will take him down slowly.
In the photo below, you can see an example of a lead wall designed and produced by Bamdad Group.
Indoor climbing wall designed and implemented by Bamdad company (Eshnooye)
bouldering
Another trend in the field of rock climbing. The power climbing style is called bouldering.
Short walls up to a maximum of 5 meters where a person displays his art in a strength challenge.
In this type of walls, contrary to the rope style and speed, they are secured with a rope.
To ensure safety, they only use boulder pads.
which should have the necessary impact for this height. These walls are mostly made with different complications and shapes and slopes.
And by placing wooden or fiberglass volumes in the path of climbers, he challenges them.
In bouldering style competitions, unlike top rope style, a person can.
Have several attempts in a certain time (4 or 5 minutes).
And the person’s score is determined based on the number of routes topped and the effort he made for the tops.
Bouldering climbing wall designed and implemented by Bamdad company (implemented in Shiraz)
speed
Among other trends in the field of rock climbing. It is a style of rock climbing
whose criterion is the measurement of time.
In this style, people compete two by two on two parallel and similar tracks (15 x 3 meters).
And the person who travels faster. will make it to the next stage.
Speed walls all over the world follow a certain standard so that athletes everywhere experience the same competition.
The style of speed climbing has found a good place in the world today.
And its flag bearer in our beloved country of Iran is Mr. Reza Alipour, one of the Qazvini rock climbers.
His record for traveling 15 meters is 48.5 seconds. He has earned the title of the fastest vertical man in the world.
Speed climbing walls
They are 10×6 meters in size and 15×6 meters in height. that the competitions are held on the walls of 6 x 15 meters.
These walls include two parallel layers of 15 x 3 meters (for 4-lane group competitions) with an exact slope of -5 degrees.
which is 20 centimeters away from the floor and 0.5 meters above the height of 15 meters of the wall.
which is a place to install advertisements or timer boards.
The color of the speed wall is gray and it has resin and quartz grains of 0.2 to 0.4 granometric.
The uniformity of the surface and the absence of distortion, the accuracy of the slope of the wall, the absence of vibration of the panels, the exact distance between the holes, etc. are some of the cases. that the builder must have enough experience and mastery and knowledge to implement it.
The climbing clips of the speed walls are of red color and should be. In terms of size and shape, it should be in accordance with the IFSC clip.
Each path contains 31 clamps, 20 large foot clamps and 11 small hand clamps.
Bamdad Sports Production Group is proud.
It has produced speed walls according to international standards and the Federation of Mountaineering and Sports Climbing
And for the walls that he produced and installed. has obtained the necessary approvals.
Speed climbing wall designed and produced by Bamdad company
Bammad Sports Production Group.
A leader in the design and installation of climbing walls in all trends.
Rock climbing equipment such as climbing clips and climbing volumes, wooden gym equipment,
It is ready to cooperate with all organizations, sports clubs, kindergartens, schools, children’s play centers, etc.
Click here to view some of the climbing wall projects done by Bamdad group.
The use of the writings of this article is allowed only by mentioning the source.